Fire suppression system for Electrical Panels , Fire Suppression System , Fixed fire fighting - Gaseous fire protection system , Gas flooding systems , FIRE SUPPRESSION SYSTEM
13-Sep-2025
Modern industries rely on high-value equipment and continuous operations where even a few minutes of downtime can lead to massive losses. Traditional water or foam-based firefighting methods may cause collateral damage to sensitive assets. That’s why Fire Engineering Technology, a trusted manufacturer and supplier of advanced fire protection systems, offers Fixed Fire Fighting – Gaseous Fire Protection Solutions tailored for critical industrial needs.
A Gaseous Fire Protection System is a fixed fire suppression solution that uses clean agents or inert gases to extinguish fires safely without leaving any residue. Unlike conventional methods, gaseous systems ensure fast, automatic suppression without harming sensitive electronics, documents, or industrial machinery.
Detection – Smoke, heat, or flame detectors identify fire in the early stages.
Activation – The control panel triggers the gas release.
Suppression – The gaseous agent floods the protected area within seconds.
Extinguishing – Fire is suppressed either by reducing oxygen (inert gas) or by absorbing heat (clean agents).
Recovery – No residue is left behind, allowing industries to resume operations quickly.
Clean Agents (Halocarbon-based): FK-5-1-12 (Novec™ 1230), HFC-227ea (FM-200™)
Inert Gases: IG-100 (Nitrogen), IG-55 (Nitrogen + Argon), IG-541 (Inergen mix)
CO2 Systems: Ideal for industrial applications in unoccupied areas
At Fire Engineering Technology, we design gaseous fire suppression systems for:
Data centers and server rooms are the backbone of the digital economy. They host critical applications, customer data, and business operations. Any downtime due to fire can result in data loss, equipment damage, business disruption, and financial losses. To address these risks, Fire Engineering Technology, a trusted manufacturer and supplier of fire suppression systems, offers advanced gaseous fire protection solutions designed for sensitive IT environments.
Data centers are highly vulnerable to fire hazards due to:
Electrical Short Circuits: High-density cabling and switchgear failures
Overheating: Continuous operation of servers and UPS systems generates significant heat
High Energy Load: Batteries, panels, and cooling systems carry fire risks
Flammable Materials: Plastic insulation, circuit boards, and wiring insulation
Human Error: Improper equipment handling or poor maintenance practices
Even a small fire incident can cause catastrophic data loss, downtime, and reputational damage.
Traditional firefighting methods like water sprinklers or foam systems are not suitable for server rooms because:
Water damages electronics and storage media
Cleanup requires long downtime
Risk of collateral damage is higher than fire itself
To safeguard data centers and server rooms, Fire Engineering Technology provides Clean Agent and Inert Gas Fire Suppression Systems that extinguish fire quickly and safely.
Agents Used: FK-5-1-12 (Novec™ 1230), HFC-227ea (FM-200™)
How They Work: Absorb heat energy and disrupt combustion without leaving residue
Benefits: Safe for electronics, zero ODP, fast discharge within 10 seconds
Agents Used: IG-100, IG-55, IG-541 (Inergen mix)
How They Work: Reduce oxygen concentration to below combustion level but safe for human occupancy
Benefits: Environmentally safe, unlimited shelf life, suitable for occupied data centers
24/7 automatic detection and suppression
Zero residue, no damage to IT equipment
Fast action with discharge time under 10 seconds
Designed as per NFPA 2001, ISO 14520, EN 15004
Scalable solutions for small server rooms to hyperscale data centers
Integrated with fire detection and alarm systems
Business Continuity: No downtime due to cleanup or damage
Cost Savings: Prevents expensive hardware replacement and data recovery
Compliance: Meets international fire safety standards for IT infrastructure
Environment-Friendly: Clean agents with zero ozone depletion potential
Trusted Partner: End-to-end support by Fire Engineering Technology – design, manufacturing, supply, installation & AMC
In today’s digital-first world, protecting data centers and server rooms from fire is not optional – it’s critical. Fire Engineering Technology delivers advanced, eco-friendly, and reliable fire suppression solutions that ensure business continuity, asset protection, and compliance with global standards.
Safeguard your IT infrastructure with trusted fire protection from Fire Engineering Technology – your partner in advanced fire suppression systems.
Power plants and electrical substations are the lifeline of modern infrastructure. They generate, transmit, and distribute electricity to industries, businesses, and households. A fire incident in these facilities can cause widespread outages, massive financial losses, equipment damage, and even national grid failure. To mitigate such risks, Fire Engineering Technology, a trusted manufacturer and supplier of advanced fire suppression systems, delivers gaseous and clean agent fire protection solutions engineered for power industry applications.
Fire hazards in power generation and distribution facilities often arise from:
Electrical Faults: Short circuits, arcing, insulation failures in HT/LT panels
Transformers: Oil leakage, overheating, and internal electrical faults
Cables & Bus Ducts: Overloaded or aged cables generating heat and sparks
Battery Rooms: Hydrogen gas accumulation leading to explosions
Control Rooms & Switchgear: Continuous operation under high load increases fire vulnerability
Turbines & Generators: Lubricant oil and fuel leaks posing ignition risk
Even a minor fire can disrupt electricity supply to entire regions, leading to downtime and safety hazards.
Water- or foam-based firefighting solutions are not suitable for electrical equipment because:
Water is conductive and can damage critical switchgear and transformers
Cleanup and downtime after foam discharge is costly and time-consuming
Fire can reignite if root causes are not suppressed effectively
At Fire Engineering Technology, we design and supply specialized gaseous fire suppression systems tailored for power plants and substations. Our solutions ensure fast suppression, minimal downtime, and maximum safety.
Agents Used: FK-5-1-12 (Novec™ 1230), HFC-227ea (FM-200™)
Applications: Control rooms, electrical panels, UPS rooms
Benefits: Non-conductive, residue-free, safe for sensitive electronics
Agents Used: IG-100 (Nitrogen), IG-55 (Nitrogen + Argon), IG-541 (Inergen)
Applications: Switchgear rooms, substations, turbine enclosures
Benefits: Oxygen reduction for fire suppression, environmentally safe
Applications: Transformers, turbine enclosures, unmanned industrial spaces
Benefits: Highly effective for high-energy fires, cost-efficient
24/7 automatic detection and suppression
Fast discharge (within 10 seconds)
No residue, minimal downtime, immediate restart of operations
Safe for electrical and electronic equipment
Designed as per NFPA 2001, NFPA 850, ISO 14520, EN 15004 standards
Integration with fire alarm and detection systems for total safety
Business Continuity: Prevents costly outages and downtime
Asset Protection: Safeguards turbines, transformers, and switchgear
Worker Safety: Reduces risk of explosions and fire-related accidents
Eco-Friendly: Clean agents with zero Ozone Depletion Potential (ODP)
Trusted Partner: Fire Engineering Technology offers end-to-end solutions – from design & manufacturing to installation & AMC support
Power plants and substations face unique fire safety challenges due to high electrical loads, flammable materials, and mission-critical operations. A single fire can result in catastrophic failures, affecting industries and communities alike. With Fire Engineering Technology’s advanced gaseous fire protection systems, power facilities can achieve reliable, residue-free, and NFPA-compliant fire safety solutions that protect both assets and people.
Oil & Gas facilities are among the highest risk industrial environments due to the presence of flammable liquids, gases, and volatile chemicals. Fires and explosions in these facilities can cause severe financial loss, downtime, environmental damage, and threats to human life. To address these challenges, Fire Engineering Technology, a trusted manufacturer and supplier of fire suppression systems, provides advanced gaseous and clean agent fire protection solutions engineered for the Oil & Gas sector.
Oil & Gas operations—from extraction and refining to storage and distribution—face multiple fire hazards, including:
Hydrocarbon Fires: Crude oil, natural gas, and refined fuels are highly flammable
Electrical Faults: HT/LT panels, switchgear, and control systems in hazardous zones
Processing Equipment: Compressors, turbines, and pumps prone to leaks and overheating
Storage Tanks: Large volumes of flammable liquids at risk of ignition
Pipelines: High-pressure leaks can cause jet fires or explosions
Battery & Control Rooms: Fire hazards from electrical equipment and hydrogen gas
A single fire incident can lead to massive downtime, asset loss, and environmental disasters.
Traditional methods like water or foam are not always suitable in Oil & Gas environments because:
Water spreads hydrocarbons instead of suppressing them
Foam requires large quantities and creates cleanup challenges
Electrical and control areas cannot be protected with water/foam without equipment damage
At Fire Engineering Technology, we specialize in engineered fire suppression systems designed for high-risk Oil & Gas operations. Our solutions ensure fast suppression, reliable performance, and compliance with global standards.
Agents Used: FK-5-1-12 (Novec™ 1230), HFC-227ea (FM-200™)
Applications: Control rooms, electrical panels, communication hubs
Benefits: Non-conductive, residue-free, safe for sensitive electronics
Agents Used: IG-100, IG-55, IG-541 (Inergen)
Applications: Switchgear rooms, battery storage, process control facilities
Benefits: Oxygen reduction for fire suppression, environmentally safe
Applications: Compressor rooms, unmanned turbine enclosures, machinery spaces
Benefits: Effective against hydrocarbon and electrical fires, fast suppression
24/7 automatic detection and suppression
Rapid discharge within 10 seconds
Zero residue and minimal downtime
Safe for electrical, electronic, and industrial equipment
Designed as per NFPA 2001, NFPA 850, NFPA 72, ISO 14520, EN 15004
Compatible with integrated fire & gas detection systems
Asset Protection: Safeguards refineries, offshore rigs, pipelines, and terminals
Operational Continuity: Prevents costly downtime and production loss
Safety Compliance: Meets global Oil & Gas fire safety standards
Eco-Friendly Solutions: Agents with zero Ozone Depletion Potential (ODP)
Trusted Manufacturer: Fire Engineering Technology delivers design, manufacturing, supply, installation, and AMC support
Oil & Gas facilities face critical fire safety challenges that demand advanced, reliable, and proven protection. Fire Engineering Technology’s gaseous and clean agent fire suppression systems ensure rapid response, asset protection, and compliance with international standards.
As renewable energy adoption grows, Battery Energy Storage Systems (BESS) are becoming essential for stabilizing grids, storing solar/wind energy, and ensuring backup power. However, these high-energy lithium-ion and lead-acid batteries pose unique fire risks. A single incident can cause thermal runaway, explosions, toxic gas release, and system-wide failure. To address these challenges, Fire Engineering Technology, a trusted manufacturer and supplier of fire suppression systems, provides advanced gaseous fire protection solutions designed for BESS applications.
Battery storage facilities face critical fire hazards due to:
Thermal Runaway: Overheating of one cell triggers a chain reaction across others
Electrical Short Circuits: Faulty wiring, overcharging, or damaged cells
Overheating from High Loads: Continuous charging/discharging cycles generate heat
Flammable Electrolytes: Release of toxic and flammable vapors when damaged
Gas Accumulation: Hydrogen or volatile gases increasing explosion risk
Mechanical Damage: Impact or improper installation leading to internal faults
Such incidents may result in toxic smoke, equipment loss, extended downtime, and safety hazards for operators and surrounding communities.
Water: Conductive, damages batteries, and ineffective against thermal runaway
Foam: Residue-heavy, unsuitable for electronics and enclosed battery cabinets
Delayed Response: Conventional suppression often cannot stop fast-spreading chain reactions
At Fire Engineering Technology, we specialize in clean agent and gaseous suppression systems that protect battery storage facilities from fire hazards without damaging sensitive equipment.
Agents Used: FK-5-1-12 (Novec™ 1230), HFC-227ea (FM-200™)
Applications: Battery enclosures, inverter & control panels, switchgear rooms
Benefits: Fast suppression, residue-free, safe for electronics, zero ODP
Agents Used: IG-100, IG-55, IG-541 (Inergen)
Applications: Large-scale battery rooms, containerized storage units
Benefits: Reduces oxygen to safe levels, environmentally sustainable
Early Smoke Detection (VESDA systems) for identifying pre-combustion stages
Automatic Release integrated with BESS monitoring and alarm systems
Rapid suppression in under 10 seconds
24/7 automatic monitoring and protection
Zero residue and minimal downtime
Safe for electronics, switchgear, and energy storage cabinets
Designed as per NFPA 2001, NFPA 855, ISO 14520, UL 9540A standards
Scalable systems for modular containers, grid-scale storage & microgrids
Asset Protection: Prevents catastrophic battery loss
Business Continuity: Reduces downtime and financial losses
Safety & Compliance: Meets international codes for BESS fire safety
Eco-Friendly: Clean agents with zero ozone depletion potential
Trusted Partner: Fire Engineering Technology offers design, supply, installation, and AMC services
Battery energy storage systems are critical to the future of clean energy, but they also bring serious fire safety challenges. With Fire Engineering Technology’s advanced clean agent and gaseous suppression systems, BESS facilities gain reliable protection against thermal runaway, electrical fires, and toxic gas risks.
CNC machines and industrial manufacturing facilities are at the heart of precision engineering and mass production. From automotive to aerospace and electronics, these facilities run high-value equipment around the clock. However, the presence of flammable coolants, lubricants, oils, and electrical systems makes them vulnerable to fire hazards. A fire outbreak in CNC machinery can result in costly downtime, equipment loss, and worker safety risks.
To address these challenges, Fire Engineering Technology, a trusted manufacturer and supplier of fire suppression systems, provides automatic, clean agent, and tube-based suppression systems tailored for CNC and industrial applications.
Industrial environments face multiple fire hazards:
CNC Machine Fires:
Flammable cutting oils & lubricants
Sparks during machining operations
Overheating spindles and motors
Electrical Fires:
Control panels, VCB/HT panels, and MCC switchgear
Short circuits or cable overloads
Dust & Particulate Fires:
Metal dust, plastics, and composite materials igniting under high heat
Hydraulic & Pneumatic Systems:
Oil leaks from press machines or hydraulic systems
Such fires spread quickly, damaging both equipment and production schedules.
Water: Damages machines and electronics
Foam/Powder: Leaves residue, requiring long cleanup and downtime
Manual Extinguishers: Depend on human intervention, often too late in CNC fires
How it Works: A heat-sensitive polymer detection tube is installed inside CNC enclosures. When exposed to fire, it bursts and discharges the suppression agent directly at the source.
Applications: CNC machines, EDM machines, injection molding machines
Benefits: Automatic, quick, localized suppression with minimal downtime
Agents Used: FK-5-1-12 (Novec™ 1230), HFC-227ea (FM-200™)
Applications: Electrical panels, server rooms, control centers
Benefits: Residue-free, fast discharge, safe for electronics
Agents Used: IG-100, IG-55, IG-541
Applications: Manufacturing halls, electrical substations in factories
Benefits: Eco-friendly, safe for occupied areas, scalable for large facilities
Automatic & 24/7 Protection: No human intervention needed
Fast Suppression (<10 seconds): Stops fires at the ignition point
Residue-Free: No damage to electronics or precision equipment
Customizable: Designed for individual CNC machines or entire industrial floors
Compliance: Meets NFPA 2001, ISO 14520, EN 15004 standards
Protects Assets: CNC machines, control panels, and production lines
Business Continuity: Minimal downtime after fire incidents
Worker Safety: Reduces risk of explosions and toxic smoke exposure
Eco-Friendly Solutions: Clean agents with zero Ozone Depletion Potential (ODP)
Trusted Support: Fire Engineering Technology offers end-to-end design, supply, installation, and AMC services
In CNC machines and industrial manufacturing facilities, fire protection is not just a compliance need – it’s a productivity safeguard. With Fire Engineering Technology’s automatic tube-based and clean agent fire suppression systems, industries can ensure quick fire control, minimal damage, and uninterrupted operations.
Archives, libraries, and laboratories store irreplaceable knowledge, research, and cultural heritage. From historic manuscripts to scientific data and valuable lab samples, these environments require the highest level of fire protection. Even a small fire can destroy centuries of information or halt critical research.
To address these risks, Fire Engineering Technology, a trusted manufacturer and supplier of fire suppression systems, delivers clean agent and gaseous fire protection solutions specifically designed for sensitive environments.
Archives & Libraries:
Paper, books, and wooden storage highly flammable
Electrical faults from lighting, HVAC, or servers
Old infrastructure with outdated wiring
Laboratories:
Flammable chemicals, solvents, and gases
Electrical equipment such as centrifuges, freezers, and fume hoods
Human error during experiments or equipment handling
A fire in these facilities can cause irreversible loss of data, cultural assets, or research results.
Water Sprinklers: Soak and destroy paper, books, and electronics
Foam or Powder: Leaves residue, making recovery impossible
Manual Extinguishers: Often too slow in fast-spreading fires
Agents Used: FK-5-1-12 (Novec™ 1230), HFC-227ea (FM-200™)
Applications: Archives, rare book rooms, data storage in libraries, laboratory instruments
Benefits: Residue-free, safe for delicate materials, fast discharge
Agents Used: IG-100 (Nitrogen), IG-55, IG-541 (Inergen)
Applications: Large library halls, laboratory control rooms, storage vaults
Benefits: Reduces oxygen to safe levels for extinguishing fire without damaging assets
VESDA (Very Early Smoke Detection Apparatus): Detects fire at incipient stage
Control Panel Integration: Ensures automatic discharge and alarm coordination
Fast suppression in under 10 seconds
Residue-free protection for delicate assets
24/7 automatic detection and suppression
Environmentally safe agents with zero ODP
Designed as per NFPA 2001, ISO 14520, EN 15004 standards
Scalable for small archives, national libraries, or large laboratories
Asset Preservation: Protects books, manuscripts, specimens, and samples
Business Continuity: Ensures research and knowledge preservation
Eco-Friendly: Clean agents safe for environment and humans
Trusted Manufacturer: Fire Engineering Technology provides design, manufacturing, supply, installation, and AMC support
Protecting archives, libraries, and laboratories is about safeguarding heritage, knowledge, and scientific progress. With Fire Engineering Technology’s clean agent and gaseous suppression systems, these critical spaces get fast, reliable, and residue-free fire protection that ensures safety without damaging valuable assets.
Fast Action: Suppresses fire within 10 seconds
Residue-Free: Safe for electronics & sensitive equipment
Eco-Friendly Agents: Zero Ozone Depletion Potential (ODP)
Automatic 24/7 Protection: Always on standby
Compliance: Designed as per NFPA 2001, ISO 14520 & EN 15004 standards
Trusted manufacturer and supplier of fire suppression systems across India
Specialized in clean agent & inert gas-based solutions
Proven expertise in industrial, commercial & critical facility protection
Custom-engineered systems designed for compliance and reliability
End-to-end services: Design, manufacturing, supply, installation & maintenance
A Fixed Fire Fighting – Gaseous Fire Protection System is essential for industries that demand reliability, continuity, and safety. With Fire Engineering Technology, you get a trusted partner that ensures advanced, NFPA-compliant, and eco-friendly fire suppression solutions for your business-critical assets.
Want to know more about our products.. fill the form below
